diff --git a/doc/source/using_building_elements.rst b/doc/source/using_building_elements.rst
new file mode 100644
index 000000000..50ab4ffdf
--- /dev/null
+++ b/doc/source/using_building_elements.rst
@@ -0,0 +1,121 @@
+Building of BuildStream Elements
+=================================
+
+This page provides an high-level overview of the processes involved in which
+Elements are built as part of the build+integration pipeline. 
+
+When `bst build` is running on a given Element, it can be - roughly - broken
+down into individual steps:
+
+- Sources are fetched
+- The sandbox is prepared
+- Configure and run commands
+   These can include:
+      - `configure-commands`
+      - `build-commands`
+      - `install-commands`
+      - `strip-commands`.
+- Caching artifacts
+
+Sources are fetched
+-------------------
+
+The hidden first step is actually validating the ``yaml``. This includes
+resolving includes, options, appends, which are denoted by ``(@)``,
+``(?)`` and ``(>)`` respectively.
+
+The first step once the ``yaml`` has been validated is that BuildStream
+will fetch the sources. This is dependent on the source ``kind`` as to
+how these are fetched. After the sources are fetched they may need to
+checked. For example a ``kind: tar`` would need to check the ``sha256``
+matches, and a ``git_repo`` source would need to switch to the specified
+commit sha.
+
+The Sandbox is prepared
+-----------------------
+
+The Sandbox is prepared as a temporary filesystem, where build
+dependencies (``build-depends:``) and general dependencies (``depends``)
+are staged, along with their own runtime dependencies. This happens in
+an abstract state, which can quickly spot repeated files and overlaps.
+
+When a dependency is being staged, the produced artifact is added from the root
+(``/``). This can sometimes be changed using the ``location:`` attribute.
+However, this applies to `BuildElements`, and not all `Elements` (where
+`BuildElement` is a subclass of `Element`) support the `location` argument. 
+
+In most cases dependencies are marked by BuildStream as immutable. 
+
+After the dependencies are staged BuildStream stages the sources in the
+``build-root`` location. The actual location of this differs slightly
+depending on the project file structure, which is why it is common to
+see elements use the variable ``%{build-root}`` which resolves to the
+correct location.
+
+Configure and Build commands
+----------------------------
+
+Now that all dependencies and sources are staged in a temporary filesystem,
+this filesystem is mounted inside BuildBox as a sandbox.
+
+The first commands to be run are configure commands and it is
+recommended to include things like moving the sources about, generating
+config files and other “configure” related actions into this section.
+These should be the commands that can only be run once (for example a
+folder can only be moved once), this is due to BuildStream
+workspaces.
+
+!!! tip “BuildStream Workspaces and Configure Commands”
+
+.. toctree::
+   :numbered:
+   :maxdepth: 1
+
+   developing/workspaces.rst
+
+::
+
+   When a workspace is opened, it stages all the sources for the indicated
+   element locally, then when doing a build of that element it uses these local
+   sources instead of pulling in fresh sources. Builds using workspaces only
+   run configure commands once, and any subsequent builds using the same
+   workspace will skip the configure commands step, therefore steps of the
+   build that aren't reproducible (without re-staging sources) should be added
+   to configure commands.
+
+After Configure commands are run, then Build commands are next. Build
+commands are intended to contain the actual build process, for example
+if the build uses ``make`` then this stage should run the
+``make target`` command.
+
+Install Commands and Caching Artifacts
+--------------------------------------
+
+Install commands are the final commands that are run before BuildStream
+collects the artifacts and closes the build sandbox. Install commands
+should mainly be comprised of moving the built artifacts from the
+``${build-root}`` to the ``${install-root}``.
+
+The `install-commands` should not clean up any of the sources, as they can be stored as a _buildtree_, which allows for introspection after the build.
+
+Directories can be created under the install location, for example
+``%{install-root}/example/``, and these will be maintained when another
+element depends on this one, for example this will become
+``example/``.
+
+The contents of the install root are cached. BuildStream caches the
+produced artifact to reduce the need to rebuild elements, instead it can
+pull from this artifact cache. It will only rebuild an element if the
+element file changes, or if the dependencies for an element changes.
+
+!!! tip “Caching Errors”
+
+::
+
+   BuildStream will also cache build errors, and if no file has changed
+   (including the dependencies) then BuildStream will display this cached error,
+   without attempting a rebuild. This is sometimes not the desired behaviour,
+   especially if the error was caused by a remote issue, like a source site
+   being temporarily unavailable. To force an attempted build use the
+   `-r`/`--retry-failed` option, documented
+   [here](using_commands.html#cmdoption-bst-build-r)